Connecting With Tv; Connecting The Power Cord - JVC CA-EXD5 Instructions Manual

Connecting up

Connecting with TV

Supplied composite video cord
Main unit
COMPONENT VIDEO
Y P P
B R
S-VIDEO
VIDEO OUT
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Main unit
Connecting directly
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
Connecting by using the S-Video cord
Main unit
S-Video cord (not
supplied)
COMPONENT
VIDEO
Y P P
B R
S-VIDEO
VIDEO OUT
Connecting by using the component video
cord
You can enjoy better quality pictures than when
TV
using the S-Video cord.
TV (or
monitor)
Green
CAUTION
TV
Use one of either the S-Video cord or the
component video cord. If both cords are used,
pictures may not be played properly.
NOTE
• In order to enjoy pictures with Progressive mode
(page 26), the TV is required to have Progressive
video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.

Connecting the power cord

• Connect the power cord after all other
connections are complete.
• The standby indicator (on the front panel) will be
lit.
Getting started
Component video cord
(not supplied)
Blue
Red
COMPONENT
VIDEO
Y P P
B R
S-VIDEO
VIDEO OUT
Main unit
AC outlet
Supplied power cord
Connection
Main unit
11