Sharp IQ-7000 Operation Manual page 46

the standard and world clocks
Using
When looking up the times for world cities, be sure to make a note of when
DST should be set for a particular city. " 0 "will appear in front of the cities
on the world clock which are set to DST.
The 1 st city on the world clock list is "LONDON".
To change the 1 st city on the list from "LONDON" to "HONG KONG", for
example:
1. Set the world clock city selection display.
2. Display the world city list which contains the city to be set. (In this
example, Hong Kong.)
Press m repeatedly until the display
appears.
3. Press the numerical key corresponding to "HONG KONG".
2
Notes:
The time for the set city is displayed for a while and then the previous
l
display appears.
Before the world city names, each mark corresponding to the setting
l
condition of each city is displayed.
4 6
containing "HONG KONG"