Editing Or Correcting Previously Input Data - Sharp IQ-7000 Operation Manual

Basic entry programmes
2. Move the cursor to the letter "A" to be deleted.
3.
Delete the letter "A".
You can also delete "A" by pressing

Editing or correcting previously input data

To edit or correct mistakes in data which have already been stored
1. Press 1 SCHEDULE 1, -1, or 1-1 to select the mode
for the correction.
2. Recall the entry to be edited using FJ.
3. Select the edit mode by pressing 1-1
4.
required and correct the data as explained under "Making corrections"
above.
5. Press 1-1 to store the corrected data.
The following descriptions explain the functions.
34
Moves the cursor to the right.
Moves the cursor to the left.
Moves the cursor up to the previous line.
Moves the cursor down to the next line.
Enters the insert mode. Pressing this key again exits
the insert mode.
Deletes the character at the cursor.
Deletes the character to the left of the cursor
("backspace").
CAPS