Remove The C3-Board; Remove The Plasma Panel Section From The Cabinet Assy (Glass) - Panasonic TC-P65S2 Service Manual

8.17. Remove the C3-Board

1. Remove the Hanger metal L. (See section 8.14.)
2. Remove the flexible cable holder fastening screws (×10
).
3. Disconnect the flexible cables (CB11, CB12, CB13, CB14
and CB15).
4. Disconnect the flexible cables (C31, C33 and C36).
5. Disconnect the connector (C35).
6. Remove the screws (×6 ) and remove the C3-Board.
8.18. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the plasma panel fastening screws (×15
,×4 ) and remove the cabinet assy.
2. For leaving the Cabinet assy from the plasma panel, pull
the bottom of the cabinet assy forward, lift, and remove.
26
, ×2