8 Disassembly and Assembly Instructions
8.1.
Remove the Rear cover
1. See PCB Layout (Section 3)
8.2.
Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screw (×1
8.3.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P51-P52, P53-P54 and P55-
P56).
3. Disconnect the connectors (P2, P6, P7, P9, P11 and
P35).
4. Remove the screws (×9
Board.
5. Remove the screws (×6
Board.
) and remove the AC inlet.
) and remove the P(MAIN)-
) and remove the P(SUB)-
8.4.
Remove
cover and the Rear AV panel
1. Remove the claws (×2
2. Remove the Side terminal cover.
3. Remove the screws (×2
4. Remove the Rear AV panel.
22
the
Side
terminal
).
, ×3
).