Trouble Shooting - The Source 730-0274 Use And Care Manual

PROBLEM
When I light the grill it does not flame
immediately.
Rotisseries burner will not light when the
igniter button is pushed.
Regulator makes noise.

TROUBLE SHOOTING

SOLUTION
--Make sure you have turn on the gas
--Make sure it has spark while you are trying to ignite the
burner.
--Push in for approximately 5 second before to turn and
ignite the grill.
--Make sure your burner is clean.
--Check to see if debris is blocking the
--Check to see there is spark that jumps to the burner from
the electrode wire. If no spark is seen.
--Check the battery located inside the button. Press and
turn counter clockwise.
--Check for loose wire connection.
--Gently bend the electrode wire closer to the burner until a
spark is seen to jump from the igniter to the burner when
you press the starter button.
--Dose the infrared back burner light when attempting to
match light? If not, check did you turn on the gas.
--Vent hose on the regulator may be plugged or regulator
may be faulty.
--Ensure the vent hole on the regulator is not obstructed.
Clear the hole, close the LP tank and gas control valves.
Wait ten minutes and re-start.
--When turning the LP tank valve on, do not cover vent hole
on the regulator.
--Check your flames for proper performance if the flames
are not correct replace regulator.
electrode sparks.