Table of Contents
Advertisement
DscCalDi
Focus Result
!
STD_AFPOS=1038
FOCUS=0,-11,9,14
Adjustment value determination is effectuated using the "STD
AFPOS" and "FOCUS" values.
If FOCUS=focus1, focus2, focus3, focus4 and the adjustment
values fulfill the conditions below, they are determined as within
specifications.
Adjustment value determination
997<=STD_AFPOS<=1097
focus1 = 0, -20<=focus2<=+25
-40<=focus3<=+45, -30<=focus4<=+35
3. AWB Adjustment
Camera
(color viewer)
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
x
OK
Pattern box
Dsc Calibration
AWB Result:
1:
AGC=176,345,513,682,852
4F_AGC=0,0,0
WB=278,512,648
CHECK=127,128,142
MS=1728,2102
Adjustment value determination is effectuated using the "AGC",
"CHECK" and "MS" values.
If AGC=a1, a2, a3, a4, a5, CHECK=wc0, wc1, wc2 and
MS=MS1, MS2, the adjustment values fulfill the conditions be-
low, they are determined as within specifications.
Adjustment value determination
50<a1<310, 100<a2<550, 200<a3<750,
300<a4<950, 400<a5<1024
wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40
1550<MS1<3850
450<MS2<2750
Adjustment values other than the above are irrelevant.
4. CCD White Point Defect Detect Adjustment
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
5. CCD Black Point And White Point Defect Detect
Adjustment In Lighted
Camera
– 18 –
x
OK
Copy
Pattern box
(color viewer)
Advertisement
Table of Contents
