Subaru Select Monitor - Subaru Legacy 2001 Service Manual

Engine (DIAGNOSTICS)

10. Subaru Select Monitor

A: OPERATION
1. HOW TO USE SUBARU SELECT
MONITOR
S048503A1601
1) Prepare Subaru Select Monitor kit. <Ref. to
EN(H6)-8 PREPARATION
Description.>
2) Connect diagnosis cable to Subaru Select
Monitor.
3) Insert cartridge into Subaru Select Monitor.
<Ref. to EN(H6)-8 PREPARATION TOOL, General
Description.>
4) Connect Subaru Select Monitor to data link
connector.
(1) Data link connector located in the lower por-
tion of the instrument panel (on the driver's
side).
(2) Connect diagnosis cable to data link con-
nector.
SUBARU SELECT MONITOR
S048503
S048503A16
TOOL, General
S2M0285
S2M0286A
B2M2960B
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor and OBD-II general scan tool.
5) Turn ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
6) Using Subaru Select Monitor, call up diagnostic
trouble code(s) and various data, then record
them.
2. READ DIAGNOSTIC TROUBLE CODE
(DTC) FOR ENGINE. (NORMAL MODE)
S048503A1610
Refer to Read Diagnostic Trouble Code for infor-
mation about how to indicate DTC. <Ref. to
EN(H6)-48 Read Diagnostic Trouble Code.>
3. READ DIAGNOSTIC TROUBLE CODE
(DTC) FOR ENGINE. (OBD MODE)
Refer to Read Diagnostic Trouble Code for infor-
mation about how to indicate DTC. <Ref. to
EN(H6)-48 Read Diagnostic Trouble Code.>
EN(H6)-40
S2M0288A
S048503A1611