OWC Mercury Installation Instructions Manual page 20

Place the bottom back onto your PowerBook and line up all of the screw holes. We
recommend partially inserting each screw only enough to line the hole up, and
proceeding to the next screw. Frequently PowerBooks will have a screw or two that are
extremely difficult to get seated fully, if you encounter resistance while inserting the
screws, you can usually press the case bottom back toward the rear a bit more and
alleviate the pressure on the screw, allowing it to be tightened for a snug fit.
Tighten the screws in a rotation starting with the inside screws, as directed by your
original Apple PowerBook manual.
Once the bottom is reattached, you're ready to try out your new OWC Mercury Optical
Drive! Boot the system up and insert a blank CD-R disc - you should be greeted with
a dialog box asking what you wish to do with it. The OWC Mercury Optical Drive works
natively with all of your favorite creation applications!
Entire contents copyright ® 2003 Other World Computing all rights reserved. JD 8/20/03
OWC Mercury Optical Drives Installation Manual Page #20