Sharp VL-NZ50U Service Manual page 9

5.
(k)
(m)
1) Take the mechanism out.
2) Remove the 3 floating screws A ((k)LX-BZ0251TAFD) and 1
floating screw B ((m)LX-BZ0253TAFN).
6.
Lithium Holder
(r)
(r)
Lithium PWB Unit
1) Remove the lithium holder and 2 screws ((r)XiPSN17P04000)
to detach the lithium PWB unit.
7.
Mechanism
NZ50U
(k)
(k)
1) Remove the 3 screws ((c)XiPSN17P03000), 4 screws
2) Remove the 2 screws ((i)XiPSF17P03000) and detach the
3) Remove the 1 screw ((i)XiPSF17P03000) and 1 screw
4) Remove the 2 screws ((c)XiPSN17P03000) and camera
8.
1) Remove the 1 screw ((c)XiPSN17P03000) to detach the
2) Remove the 1 screw ((c)XiPSN17P03000) to detach the lens
9
Microphone Cover
(o)
(i)
(i)
NZ100U/NZ150U
(h)
Camera Rear
(c)
Cabinet
((i)XiPSF17P03000) and 1 screw ((h)XiPSF17P02000)
(NZ50U only) fixing the camera rear cabinet to detach it.
(Note: When detaching the camera rear cabinet, pay atten-
tion to the FPC of the camera operation unit.)
camera side cover in the direction of the arrow. (Note: When
detaching the side cover, pat attention to the lead wire of the
speaker.)
((o)XiPSN17P06000) and detach the microphone cover in
the direction of the arrow. (Note: When detaching the micro-
phone cover, pay attention to the lead wire of the micro-
phone.)
front cabinet.
(c)
(c)
Power SW Unit
power SW unit. (Note: When detaching the power SW unit,
pay attention to the FPC.)
unit.
VL-NZ50U/NZ100U
VL-NZ150U
(i)
(c)
Camera Front Cabinet
(c)
(i)
(i)
(i)
(i)
(c)
Camera Rear
Cabinet
(c)