Sharp VL-NZ50U Service Manual page 122

VL-NZ50U/NZ100U
VL-NZ150U
VL-NZ50U/NZ100U/NZ150U SERVICE JIG SPECIFICATIONS
Ref. No. Part No.
1-1. Adjusting jigs for checking the mechanism
No.
1 PB-use cassette torque meter
2 Torque gauge
3 Torque gauge head
4 Tension gauge 4N
5 Dial tension gauge
6 Torque screwdriver 150mN·m
7 Master plane
8 Height adjustment jig
9 Height adjustment screwdriver
10 Alignment tape - I
11 Alignment tape - II
12 For hexagon nut opposite side 3mm bit
13 Reel hub for back tension measurement
14 String for measuring the pinch roller pressure
1-2. Parts for periodical inspection and maintenance
No.
1 Oil
2 Cleaning paper
3 Grease: Moly Coat YM-103
Description
Name New part
Name New part
Ref. No.
Code
Type number, Application
1mN·m/1.5mN·m
For use in VS-REW take up torque adjustment JiGTG0045
For use with the above torque gauge
For measuring of pinch roller pressure
PTG-10
No. 0 cross bit, No. 00 cross bit
For checking the reel base height
For height adjusting
For guide roller adjustment.
For Tu guide adjustment.
For T roller adjustment.
Bit shape.
For tape running adjustment
For Switching Point adjustment
For S guide hexagon nut installation.
Refer to Service Manual.
Refer to Service Manual.
Type number, Application
Cosmo Hydro HV22
Dusper ∑ (SIGMA) ozu Co., LTD
Dow corning
154
Part No. Description
Part code
9DASD-1015
9EQTGH-DH5000
JiGSG0400
9DAPTG-10-10W
JiGTD1500RTDH
9EQMP-VLPD1
9DAHG-PD1
9EQDRiVER-DH5
VR3-GAZXS
VR3-GTZQS
95CM22001
Prepared in the service station.
Prepared in the service station.
Part code
9EQ-OiL-HV22
JiGDUSPER
99FGREASE-YM103
VL-SD20U
Code
Code
DB
CN
BW
BK
CA
CB
CL
BZ
BC
CF
CG
BL
–
–
Code
AE
AP
AH