Sharp VL-NZ50U Service Manual page 35

(5) Click on [Repair use].
(6) Input the necessary information for the application.
For the indispensable input items, be sure to input them.
Select the [Group/company] and [Kind name] from the list.
Input the [Model name].
Input the [Serial number].
Input the [Site/department of repair].
(7) Click on [motion].
The confirmation screen will appear.
(8) Click on [Yes].
2. Print the application result.
(1) Print out the application result screen.
Control the application result as evidence.
To print it, select "Print (P)" from the "File (F)" in the menu bar or click on the print button in the tool bar.
(2) Click on [Menu] to complete the application.
If you create applications in succession, repeat steps (1)~(8).
To complete it, click on [End] in the menu screen.
MODEL ID SETTING
Address VCR ADJ FD, FE, FF
Procedure 1) Set the unit to the VCR adjustment mode with command 12.
2) Give E
3) Assign a MODEL ID to each address.
Examples • During E
Click
Mode
2 PROM write enable with command 20.
2
PROM (IC705) replacement.
VCR STOP mode
Address
Data
35
VL-NZ50U/NZ100U
VL-NZ150U
FDh FEh FFh Model
10 20 2B NZ50U/C/K
27 NZ100U/C
32 NZ150U