Product Identification - Goodman GME95 Technical Manual

PRODUCT IDENTIFICATION

The model and manufacturing number are used for positive identification of component parts used in manufacturing.
Please use these numbers when requesting service or parts information.
G M
PRODUCT
FURNACE TYPE
TYPE:
E: Two Stage/
G: Goodman
®
A: Amana
Brand
SUPPLY TYPE
M: Upflow/Horizontal
C: Downflow/Horizontal
WARNING WARNING
WARNING WARNING
arising from improper service or service procedures. If
you install or perform service on this unit, you assume
responsibility for any personal injury or property damage
which may result. Many jurisdictions require a license to
install or service heating and air conditioning equipment.
is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX. All rights reserved.
2
E 95
EEM motor
NOMINAL INPUT
040: 40,000 Btuh
060: 60,000 Btuh
080: 80,000 Btuh
100: 100,000 Btuh
115: 115,000 Btuh
AFUE
95: 95%
HIGH VOLTAGE!
Disconnect ALL power before servicing or installing this unit. Multiple power
sources may be present. Failure to do so may cause property damage, personal
injury or death.
Goodman will not be responsible
for any injury or property damage
060 3
CABINET
WIDTH
B: 17-1/2"
C: 21"
D: 24-1/2"
AIRFLOW
CAPABILITY
@ 0.5" ESP
3: 1200
4: 1600
5: 2000
WARNING WARNING
the requirements of an "entry level technician", as speci-
fied by the Air-Conditioning, Heating, and Refrigeration
Institute (AHRI). Attempting to install or repair this unit
without such background may result in product damage,
personal injury or death.
B X A
MAJOR
REVISION
A: Initial Release
REVISION
A: Initial Release
ADDITIONAL
FEATURES
N: Natural Gas
X: Low NOx
Installation and repair of this unit
should be performed ONLY by in-
dividuals meeting, at a minimum,
A
MINOR