Palmrest Installation - Packard Bell EasyNote LS11HR Service Manual

Palmrest Installation

1.
Place palmrest onto keyboard, exposing touchpad module FFC cable (B)
2. Connect cable (B) to mainboard.
3. Flip palmrest over and insert flanges into lower cover slots (C)
4. Press down on palmrest to secure.
5. Place computer on surface lower cover up.
6. Install and secure eleven (11) screws A to lower cover
7. Install HDD module.
ID Size
A M2.5*6
Machine Maintenance Procedures
(Figure
Quantity
11
(Figure 3-17).
(Figure 3-17).
3-14).
Screw Type
0
3-21