Technical Assistance - Glas Craft GCP2RA User Manual

Thank You for selecting GlasCraft spray equipment
Should you have any questions or need technical assistance, contact your factory authorized
GlasCraft distributor.
For any issues your distributor cannot address, the GlasCraft technical service department is
always available to assist you with the operation of your spray equipment. To help our technical
representatives expedite your call and better address your questions, please have the following
information ready and available when you phone GlasCraft.
* If your questions are not urgent, You can e-mail all correspondence to service@glascraft.com
Model: _____________________________
Serial number: _______________________
Type of spray gun: ____________________
Serial number: _______________________
Is your equipment:
Single phase: _______ Three phase ______
What is the inbound voltage
to your equipment: ____________________
Temperature setting ISO: _______________
Temperature setting POLY: ______________
Temperature setting HOSE: _____________

Technical Assistance

Distributor: _________________________
Phone: ____________________________
Contact: ___________________________
For Air Powered Systems:
Air compressor size: __________________
CFM generated: _____________________
Pressure at the system:
Hydraulic ________ Pneumatic _________
Dynamic fluid pressure:
ISO __________ POLY ___________
Spray gun chamber size: ______________
Material being sprayed: _______________
Viscosity: ISO _________ POLY ________
Approximate material temperature: ______
27