Switch - H.264 4-CH User Manual

Less than: This item can be setted only when no disk space, set percent (1-99). When HDD space reach this setting
limitation, DVR will have these two following prompts:
Show Message：Pop up message frame on DVR screen
Buzzer: DVR will buzz when alarm occurs

5.5 Switch

Some models combine the functions of DVR/HVR/NVR together, can receive multi-type signal input
Support:
1. Support pure analog signal input (DVR type)
2. support analog + network HD video signal input( HVR type, this can be used under the situation that needs
traditional analogue effect+several channels need network HD effect, which especially suited for upgrading the
current analogue project).
3. Support pure network HD video signal input (NVR type, used under the situation that all channels need HD
effect)
Customers can switch DVR/HVE/NVR type according to their demands
Warning
Don't switch the channel mode if not necessary , once changed , the original related date maybe lost even
1：
cause the machine to normal use
2: Please don't operate this function if non-professional
Channel Type
Switch among DVR/HVR/NVR type
Operating steps are as below:
1. Choose "main menu" "switch" "channel type list"
2. In channel type list, there are many channel types of combination ways available (as picture5.6-1) .In analogue
channels, the numbers under resolution mean the maximum analogue channels can be connected under that resolution.
In digital channels, the numbers under resolution mean the maximum IP camera or other network device channels can
be connected under that resolution. Customers can choose any of the combination according to their demands. Click
"OK"to finish DVR/HVR/NVR type shift (needs restart ind DVR when shifting)
30
USER MANUAL