Wireless Mac Filtering - TP-Link TD-W9980 User Manual

TD-W9980

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.

4.8.4 Wireless MAC Filtering

Choose menu "Wireless 2.4GHz"  "Wireless MAC Filtering", you can control the wireless
access by configuring the Wireless MAC Filtering function, shown in Figure 4-42.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.

Status: The status of this entry either Enabled or Disabled.

Description: A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-43:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX
00:1D:0F:11:22:33.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
Figure 4-42
Figure 4-43
(X is any hexadecimal
55
digit). For example: