TP-Link TD-W9980 User Manual page 63

TD-W9980
There are three wireless security modes supported by the modem router: WPA/WPA2 – Personal,
WPA/WPA2 – Enterprise, WEP (Wired Equivalent Privacy).
 Disable Wireless Security: If you do not want to use wireless security, check this radio
button. But it's strongly recommended to choose one of the following modes to enable
security.
 WPA/WPA2-Personal: It's the WPA/WPA2 authentication type based on pre-shared
passphrase. The modem router is configured by this security type by default.
 Authentication Type: You can choose the type for the WPA/WPA2-Personal security on
the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK
authentication type automatically based on the wireless station's capability and request.
 Encryption: You can select Auto, TKIP or AES as Encryption.
 Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the Router or can be found in Figure 4-38.
 Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WPA/WPA2 – Enterprise: It's based on Radius Server.
N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
Figure 4-41
53