JVC 0303NHMMDWJEIN Instructions Manual page 49

To change the transmittable signals for
operating a CATV converter or DBS tuner
1. Press and hold CATV/DBS
2. Press CATV/DBS CONTROL.
3 Enter a manufacturer's code using buttons 1 – 9,
and 0.
See the list on the right column to find the code.
4. Release CATV/DBS
The following buttons can be used for operating a CATV
converter and DBS tuner:
CATV/DBS : Turn on and off a CATV converter or DBS
tuner.
After pressing CATV/DBS CONTROL, you can perform the
following operations on a CATV converter or DBS tuner:
CH +/–: Change the channels.
1 – 10/0, 0, 100+ (+10):
Select the channels.
The 10/0 button will function as the ENTER
button if your equipment requires pressing
ENTER after selecting a channel number.
5. Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
When your CATV converter or DBS tuner turns on or off, you
have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner, try each one until the correct
one is entered.
Note:
You cannot preset the signals for both the CATV converter and DBS
tuner at the same time.
.
.
.
For DBS tuner
Manufacturer
JVC
Amstrad
Blaupunkt
Echostar
Goldstar
Grundig
Hirshmann
Instrument
ITT/NOKIA
Kathrein
NEC
Orbitech
Philips
RCA
Samsung
Schwaiger
Siemens
Sony
Technisat
For CATV converter
Manufacturer
General Instrument
Hamlin/Regal
Jerrold
Oak
Panasonic
Pioneer
Scientific Atlanta
Tocom
Zenith
Manufacturers' codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
Codes
56 , 57, 67
*
43, 44, 45, 46, 47, 48, 49
30
50, 51, 67
31
32, 33
48, 52, 53, 54, 55
68
34
52, 58, 59, 60, 61, 62, 63
35, 36
48
37, 38
65
39, 40
61, 64
41, 42
66
48
*Initial setting
Codes
06, 07, 08, 09, 10, 11,
12, 13, 14, 29
01, 02, 03, 04, 05
06, 07, 08, 09, 10, 11,
12, 13, 14
15, 16, 17
18, 19, 20
21, 22
23, 24, 25
26
27, 28
46