Basic Settings; Adjusting The Front Speaker Output Balance; Listening At Low Volume (Loudness); Using The Sleep Timer - JVC 0497OFYOTKJEMEN Instructions Manual

Basic Settings

Adjusting the Front Speaker Output Balance

SETTING

Listening at Low Volume (Loudness)

SETTING

Using the Sleep Timer

SETTING
Page 13
Some of the following settings are required after connecting and positioning your speakers in your listening
room, while others will make operations easier.
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output
balance.
On the front panel only:
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for adjusting the balance.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "BALANCE" appears on the display.
3. Press Control @ @ @ @ @ / # # # # # to adjust the balance.
• Pressing Control @ decreases the right channel output.
• Pressing Control # decreases the left channel output.
Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function
automatically boosts the bass level as you lower the volume.
On the front panel only:
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for setting the loudness.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "LOUDNESS" appears on the display.
3. Press Control @ @ @ @ @ / # # # # # to set the loudness function to "ON" or "OFF."
• Select "ON" to activate the loudness function.
The LOUDNESS indicator lights up on the display.
• Select "OFF" to cancel it.
The indicator goes off.
Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than
play all night.
On the front panel only:
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for setting the Sleep Timer.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "<SLEEP>" appears on the display.
3. Press Control @ @ @ @ @ / # # # # # to set the shut-off time.
Each time you press the button, the shut-off time on the display changes as follows, and the SLEEP
indicator lights up on the display.
10 20 30 40 50
0
(Canceled)
60 70 80