Sony KP-48V75 Service Manual page 9

Connecting an AV receiver
Connect an optional AV receiver to the VIDEO 1 IN
jacks at the rear of the projection TV.
If your AV receiver has the TV input jacks, connect
them to the TV OUT jacks at the rear of the projection
TV.
VMC-810S/820S
(not supplied)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
IN OUT
VIDEO 1 VIDEO 3 TV MONITOR AUDIO
(VAR/FIX)
S VIDEO
Rear of
projection TV VIDEO
L
(MONO)
AUDIO
R
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
Monitor video Monitor audio
output output
AV receiver
TV audio input
TV video input
VMC-810S/820S
(not supplied)
Getting Started 11 -EN
Connecting two VCRs for tape editing using MONITOR OUT
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.
S VIDEO
VIDEO
VCR (for playback)
L
CONTROL S (MONO)
OUT
AUDIO
OUT
AUDIO VIDEO
LINE R
IN
OUT
Video/audio
outputs
EN
VMC-810S/820S
(not supplied)
Notes
• Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
• You can use the S video jack to connect a VCR for playback
and the composite video connector to connect a VCR for
recording.
12 -EN Getting Started
Rear of projection TV
IN OUT
VIDEO 1 VIDEO 3 TV MONITOR AUDIO
(VAR/FIX)
VCR (for recording)
AUDIO VIDEO
LINE
IN
Video/audio
AUDIO-R (red)
inputs
AUDIO-L (white)
VIDEO (yellow)
VMC-810S/820S
(not supplied)
• When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the VCR's line input, while at
the same time connecting from the projection TV's VIDEO IN
connectors to the VCR's line output, as shown below.
Rear of projection TV
VIDEO IN MONITOR
OUT
VCR
VCR
DO NOT CONNECT IN THIS WAY.
OUT
IN
LINE
IN OUT