Changing The Menu Larguage; Watching The Tv - Sony KP-48V75 Service Manual

Presetting channels
You can preset TV channels easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure if you perform
AUTO SET UP (page 21). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press V or v to select , and press .
3
Press V or v to select AUTO PROGRAM, and
press .
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
projection TV starts scanning and presetting
channels automatically. When all the receivable
channels are stored, "AUTO PROGRAM"
disappears and the lowest numbered channel is
displayed.
4
Press MENU to return to the original screen.
To exit AUTO PROGRAM
Press any button.
Notes
• If the AUTO PROGRAM menu appears in gray, the projection
TV is set to a video input and you cannot select AUTO
PROGRAM. Press ANT so that a channel number appears.
• Presetting channels is also available for the AUX input.
Changing the
menu language
If you prefer Spanish or French to English, you can
change the menu language.
You do not have to do this procedure if you select the
language during AUTO SET UP (page 21).
Do this procedure only when you want to set it
manually.
1
Press MENU.
2
Press V or v to select , and press .
3
Press V or v to select LANGUAGE, and press
.
SET UP
CHANNEL ERASE/ADD
CHANNEL CAPTION
CHANNEL BLOCK
F AVORITE CHANNEL
CABLE : ON
AUTO PROGRAM
VIDEO LABEL
L ANGUAGE : ENGLISH
CC CONVERGENCE
MENU
Exit
Use MENU
4
Press V or v to select your favorite
language, "ENGLISH", "ESPAÑOL", or
"FRANÇAIS" and press .
PREFERENCIAS
BORRAR/AÑADIR CANAL
NOMBRE DEL CANAL
BLOQUEAR CANAL
CANAL FAVORITO
CABLE : SI
AUTO PROGRAMACION
ETIQUETA DE VIDEO
LENGUAJE : ESPAÑOL
CC CONVERGENCIA
MENU
Use Exit MENU
5
Press MENU to return to the original screen.
Note
• Certain parts of the Spanish or French menus remain in
English.
Getting Started 25 -EN
Operations

Watching the TV

MUTING TV (POWER)
TV (FUNCTION)
TV/VIDEO
DISPLAY
SLEEP ANT
1 2 3
0 – 9 buttons
4 5 6
7 8 9
JUMP
0 ENTER
EN
VOL +/–
CH +/–
1
Press TV (POWER) to turn on the projection
TV.
The TIMER/STANDBY indicator flashes until the
picture appears.
POWER
TV
If "VIDEO" appears on the screen, press ANT so
that a channel number appears.
2
Press TV (FUNCTION).
FUNCTION
TV
Once you press TV (FUNCTION), the projection TV
function is set unless another function button is
pressed.
26 -EN Operations
3
Select the channel you want:
To select a channel directly
Press the 0 – 9 buttons, and press ENTER.
For example, to select channel 10, press 1, 0 and
ENTER.
1 2 3
4 5 6
7 8 9
ENTER
0
To scan through channels
Press CH +/– until the channel you want appears.
CH
The channel can also be selected without pressing
ENTER.
4
Press VOL +/– to adjust the volume.
VOL
VOLUME
Switching quickly between two
channels
You can use the JUMP button to switch or "jump" back
and forth between two channels.
Press JUMP. JUMP
Pressing JUMP again switches the channel back to the
one you selected last.
Note
• You cannot jump to channels you scanned through using the
CH +/– buttons.
Muting the sound
Press MUTING.
"MUTING" appears on the screen.
MUTING
To restore the sound, press MUTING again, or press
VOL +.