Strong SM-RAZOR-F-M Instruction Manual page 7

Step 3: Hang television on to the Wall Plate
A. Carefully lift the television and place arm hooks over and onto angled lip in Wall
Plate (Figure 6). Do not release the television until it is completely connected to the
Wall Plate.
B. Gently press on the bottom of the TV to lock the arms onto the wall bracket. (Figure 7).
Figure 6
WIRE MANAGEMENT KICKSTANDS
The SM-RAZOR-F mounts are equipped with a Kickstand that provides space between the
TV and the wall for connecting or disconnecting cabling.
Note: These Kickstands are provided for servicing only, it is recommended that they are collapsed
and the arms locked during normal placement.
A. Pull down on the rings at the bottom of
the arms to release them from the wall
bracket.
B. Pull the kickstands out on each arm so that
they rest on the wall. (Figure 8).
C. When finished, collapse the kickstands to
allow the arms to lock onto the wall bracket.
© 2012 STRONG
SM-RAZOR-F Installation and Users Manual
Figure 7
Installing
Figure 8
Locked
pg.7