Strong SM-RAZOR-F-M Instruction Manual page 6

SM-RAZOR-F Installation and Users Manual
Step 2: Mount Arms to television
A. Determine the diameter of the screw
(parts C through P & U) your TV requires
by carefully trying to hand-thread one into
the threaded insert on the rear of the TV. If
there is any resistance, stop immediately.
B. Spacers are commonly needed on televisions
with curved backs or recessed screw
inserts. The screw will thread through the
appropriate washer (Q or R), any spacer
needed (S or T) and the arms into the TV.
C. Ensure the arms are installed flat side to
television and are square to each other after
all screws have been installed (Figure 4).
D. Slide the clip up to lengthen and down
to shorten the release string. Adjust the
height of the Arm release to be above the
bottom of the TV. (Figure 5).
pg.6
Figure 4
Figure 5
Lengthen
Top of Arm
Shorten