Etc-Inverter Mt Board Removal - Sony KDL-32L504 Service Manual

1-8. ETC-INVERTER MT BOARD REMOVAL

1 Remove 5 screws from Board cover
2 Pull out the Board from Lamp socket
2
ETC-Inverter MT Board
KDL-32L504
LCD Panel
1
Cover
REMOVE SCREWS
SECURING SHIELD
END VIEW
BACKLIGHT
SOCKET
2
DO NOT
REMOVE
BACKLIGHT
SCREWS
Plastic Strip
ETC-Inverter MT Board
holding
Lamp Socket
REMOVE SCREWS
SECURING SHIELD
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
ETC-INVERTER MT BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32" model but applies to all models.
KDL-32L504
17