Service Modes - Panasonic DMR-EH50P Service Manual

11.3. Service Modes

Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneous ly for five seconds.
Mode name
Release Items Item of Service Mode executing is cancelled.
Error Code Display Last Error Code of U/H/F held by Timer is
displayed on FL.
*Details
Diagnosis Functions".
ROM Version Display Region code, MAIN firm version, TIMER firm
version and DRIVE firmware versions are
displayed on FL for five seconds per each
version in order, but ROM version will be left
displayed.
White Picture Output White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
"I/P switch: [1] [4]"
RTSC Return in XP L1 input signal is encoded (XP), decoded
(A & V) (XP) and output decoded signal to external
without DISC recording and DISC playback.
I/P Switch Switch Interlace and Progressive in EE mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture
Output" and "RTSC Return in XP (A & V)"
modes.
Item
Description
are described in "11.1.
FL display
Self-
" * '' are version displays.
*Initial mode is "Interlace".
Switch Interlace/Progressive
*Initial mode is "Interlace".
Switch Interlace/Progressive
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Switch Interlace/Progressive
Audio 44.1 kHz/ 48 kHz Switch
Initial mode is Interlace
Switch Interlace/Progressive
19
DMR-EH50 P / DMR-EH50 PC
Key operation
(Remote controller key)
Press [0] [0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Press [1] [1] in service mode.
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
Press [1] [2] in service mode.
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Press [1] [3] in service mode.
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.