Using Features; Using Bravia Sync With Control For Hdmi - Sony Bravia KDL-32L504 Operating Instructions Manual

Using Features
Using BRAVIA@ Sync™ with
Control for HDMI
The BRAVIA Sync function allows this TV to
communicate with other Sony equipment
supporting the Control for HOMI function.
To connect Sony equipment with
Control for HOMI
Use an
HOMI
cable that bears the
HOMI
logo
for connection. See the
HOMI
connection
shown in the Quick Setup Guide provided with
the TV documentation.
Setting the Control for HOMI
The Control for HOMI function must be set
up in order for the TV to communicate with
other Control for HOMI enabled equipment.
See page 36 for information on how to set up
this TV's Control for HOMI function. For
other equipment, refer to its operating
instructions.
Available options using Control for
HOMI
The following operations are available after
you connect the supported Sony equipment
with Control for HOMI function to your TV:
• Automatically turn off the connected
equipment when you turn off the TV.
• The TV will automatically turn on with the
respective
HOMI
input.
• The connected equipment is turned on by
One-Touch-Play.
• Possible operations with BRAVIA Sync
buttons, see page 18.
When a Sony A/V receiver with BRAVIA
Sync is connected, the following additional
operations are possible:
• Turning on the A/V receiver when the TV is
turned on.
• Automatically switching to the audio output
of the A/V receiver's attached speakers.
• Adjusting the volume and muting of the A/V
receiver with the TV's remote control.
21
•