Wide Mode; Wide Mode With Pc - Sony Bravia KDL-32L504 Operating Instructions Manual

Wide Mode
The Wide Mode feature allows you to select
the screen display to your preference. Based on
the original signal source, you may see black
bars around the picture or just on the both sides
of the screen. Sometimes you will see the
picture fill the full screen. This is due to the
signals your TV receives.
You can manually select available Wide
Mode settings as you watch your TV by
pressing the WIDE button on your remote
control or you can set your TV to Auto Wide.
To set Auto Wide
Press MENU then go to the Screen settings.
Select Auto Wide and set to On.
Wide Mode with PC
Wide Mode is also available for the PC
settings. When a PC is connected to the TV
and PC input is selected, you can change the
PC Screen settings.
•
To change the Wide Screen Mode
Press WIDE repeatedly to cycle through the
available modes.
4:3 Original source 16:9 Original source
Standard-
High-definition source
definition source
[R]]
KJj
J J
Wide Zoom Wide Zoom
~ ~
0
Normal Normal
[R]] This mode is not available.
Full Full
~
KJj
Zoom Zoom
D D 0
Normal is available with 480i or 480p sources
only.
To change the Wide Screen Mode for
~
PC Timing
~.
Press WIDE repeatedly to cycle through the
~
available modes while in the PC input mode.
2"
a
Incoming PC signal
(I)
~
800
x
600
J
Normal
I~I
Full 1
[R]]
Full 2
~
• Use the Auto Adjustment to adju t
the display position and phase of the
picture when the TV receives an input
signal from the connected PC.
• Change the screen mode to
accommodate for the display of the
main window in PIP feature.
23