Displaying The Av I/F 1 Screen - Kenwood DDX7015 Instruction Manual

Setup Menu
AV .Interface
~'..'
""'"
'.
',,;,
~,''''~ ",'
",
.. .
'" '"
~"""."'.M.'
',oo.',~'
."."."""",,,,
"=""w'"C..."."
You can set audio and visual (AV) interface parameters.
72 English
OJ
Returns to the Control screen of the previous
source.
[2J Calls the Sound Effects Menu. (see page 84)
IT] Calls the Setup Menu.
m Selects a navigationsystem connection.(0
RGB)
"RGB":
Allowsthe Kenwood'sNavigation System
to connect via its interface cable.
"AV-IN":Allows a third-party navigation system to
connect via the AV INPUT port.
"OFF": Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is switched.)
W Sets a name to be displayed when you select a
system that is connected via the AV INPUTport.
(0 VIDEO)
~
Ifyou have set the navigation system connectionto
~
"AV-IN", the display is fixed to "NAV".
W Sets an image display of the system that is
connected via the AV INPUTport. ([l1 Normal)
"Normal": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"AUTO": When an image signal is entered via the
AV INPUT port, this image is displayed.
m
Sets how the rear camera image is displayed.
"Reverse": Displays with left and right reversed.
"Normal":
Displays as it is.
~
"R-CAM View" can be set only when "AV-INName"
~
is set to "R-CAM".
W
Displays the AV IfF 2 screen.
E2
:~UCh
IS not shown,
to display it.