Displaying The Audio Control 1 Screen; Displaying The Audio Control 2 Screen - Kenwood DDX7015 Instruction Manual

,.~"A".
u,..d,.~i~o' C,on...t~r~o I".
.. ~.~..~ ~~.~~. , ~~,
"..
,..." ~,~..~ , ,..........
You can adjust the front and rear and right and left audio balance.
IT] Returns to the Control screen of the previous
source.
W
Calls the Setup
Menu. (see
page 57)
W
Calls the Sound Effects Menu.
m Adjusts the right and left volume balance,
[[] Adjusts the front and rear volume balance.
[]] Adjusts the volume of the present
source based on
the difference level of original volume,
1.\
If you have increased the volume first, then
ill
reduced it using the "VoL Offset", the big sound
may suddenly be generated when you switch to
another source.
IlJ Adjusts the subwoofer volume.
W Turns the Loudness control function On or Off.
(Does not appear when the optional accessory DSP
unit is connected.)
If turned
"On", high and low tones are automatically
enhanced during low volume.
([2'] On)
W Displays the Audio Control 2 screen.
[1]] Adjusts the bass boost of the B.M.S power
amplifier (optional accessory).
~
You may not set some models of power amp boost
~
to "+18", See the catalog or instruction manual of
power amplifier.
[j] Set the center frequency
of bass boost you have set
for the "AMP Bass".
If you set it to "Low", the center frequency is
dropped for 20 to 30%.
IUi Displays the Audio Control 1 screen.
English 85