Av Interface; Displaying The Av I/F 1 Screen - Kenwood DDX6017 Instruction Manual

Setup Menu

AV Interface

You can set audio and visual (AV) interface parameters.

Displaying the AV I/F 1 screen

AV
AV I/F 1 screen
3
M e n u
Audio 2
Set Up
SRC
1
66 English
I / F S e t Up
N AV
AV - I N
4
A V - I N Name
5 V I DEO
A V - I N
N o r ma l
R - C A M V i e w
N o r ma l
AV I / F 1
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (see page 78)
3 Calls the Setup Menu.
4 Selects a navigation system connection. (
"RGB" : Allows the Kenwood's Navigation System
to connect via its interface cable.
"AV-IN": Allows a third-party navigation system to
4
connect via the AV INPUT port.
5
"OFF" : Must be used if no navigation system is
connected. (The navigation display is
6
cancelled when the AV source is switched.)
7
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
8
( VIDEO)
If you have set the navigation system connection to
"AV-IN", the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT port. (
"Normal" : When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"AUTO": When an image signal is entered via the
AV INPUT port, this image is displayed.
7 Sets how the rear camera image is displayed.
"Reverse": Displays with left and right reversed.
"Normal": Displays as it is.
"R-CAM View" can be set only when "AV-IN Name"
is set to "R-CAM".
8 Displays the AV I/F 2 screen.
AV
If
touch
Normal)
I / F S e t Up
is not shown,
or to display it.
RGB)