Troubleshooting Guide - Kenwood DDX7015 Instruction Manual

Troubleshooting Guide
Some system functions are limited to control depending on your setup.
"Multi Channel" has been set to "2/0"
or "3/0" (no rear speaker setting) on
the Speaker Set Up screen (page 61).
The Zone Control has been turned
On (page 901.
"Multi Channel" has been set to "2/0"
or "2/2" (no center speaker setting) on
the Speaker Set Up screen (page 61).
"Sub Woofer" has been set to "Off" on
the Speaker Set Up screen (page 611.
English 95