Pioneer DV-626D Service Manual page 89

0
Remote sensor
Point the remote control toward the remote sensor to operate
the player.
-
0 (open/close) button
Press to open and close the disc tray.
=
7 (stop) button
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it
stopped. Pressing twice causes the disc to return to the
beginning of the disc if playback starts again .
~
8 (pause) button
Press during playback to pause. Press again to resume
playback.
!
3 (play) button
Press to start or resume playback.
@
¡ ¢ (forward) button
Press to advance to chapters/tracks. Press and hold to perform
fast-forward scanning.
#
4 1 (reverse) button
Press to go back to previous chapters/tracks. Press and hold to
perform reverse playback scanning.
$
Disc illumination
Lights when a DVD is loaded and when no disc is loaded.
Turns off when a disc format other than DVD is loaded in the
player.
%
Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
^
FL DIMMER button
Press to change the brightness of the FL display and disc
illumination in four steps: maximum brightness, medium
brightness, minimum brightness, and off. When the FL display
is turned off, the FL OFF indicator lights.
&
PICTURE CONTROL button
Press repeatedly to select one of the programmed picture
quality settings. The setting changes each time the button is
pressed.
*
VIRTUAL DOLBY DIGITAL button
Press to turn the Virtual Surround function on and off.
(
AUDIO button
Press repeatedly to select one of the audio soundtracks
available on a DVD.
)
POWER switch
Press to switch the player on or off.
DV-626D
89