Save Configuration To Usb.; How To Upgrade Software - Edision HDMI Modulator single DVB-T User Manual

4.1.7 Save configuration to USB.

Press "MENU/OK" button to enter setup menu. Use " "(Left) or " "(Right)
button to select "Save to usb" option. Press " "(UP) button" to start saving
process and then the display will appear "Success!" when the procedure is
completed.

4.1.7 How to upgrade software

1: Copy the "jedi.img" file to the USB device.
2: POWER OFF the modulator.
3: Plug the usb device into USB port on the back of the device.
4: POWER ON the modulator.
5: When on the OLED display appears "Upgrade Yes(*) No( )", press "MENU/OK"
button to start upgrade process.
Upgrade procedure will finish after 10 seconds approximately.
WARNING! DO NOT power off the modulator while upgrading!! Damage to the
device may occur !
If you do not want to upgrade software, press " "(DOWN) button to select "No
(*)" and then press "MENU/OK" button to end upgrade submenu.
8