Blackridge 180 Hi-Flow User Manual page 16

Air TAp
pic. 13
The air tap will need to be opened to allow the air
to flow to the attached air tool.
To open air tap rotate the handle so that it lines
up with the fittings and hose, not supplied.
To close air tap rotate the handle so that it is at
90º to the fittings and hose, not supplied.
drAiN TAp
pic. 14
After use open the drain tap to drain excess
air and any moisture. The excess air will also
help purge the moisture. Leave the drain tap
open when air compressor is not in use, so any
moisture can continue to drain
To open the drain tap pull the lever down
to vertical.
To seal the drain tap push the lever up
to horizontal.
NOTE: Remember to seal the drain tap before
starting the compressor.
pic. 13
Rotate tap handle to open/close
Closed tap
pic. 14
Drain Tap Sealed
To close and seal push lever up Right or left
Drain tap opened un-sealed
To open and drain pull lever down
16
start/stop the air supply to
your attached tool
Open tap
OR