Blackridge BR5000 Instruction Manual

Blackridge BR5000 Instruction Manual

2.5hp air compressor belt-drive

Advertisement

Quick Links

INSTRUCTION MANUAL
2.5HP Belt-drive motor
40 Litre tank size
Includes Nitto style fitting
Perfect for most medium duty air tools
40
L
TANK CAPACITY
115
PSI
8 BAR PRESSURE
150
L/MIN
FREE AIR DELIVERY
12
MTH
WARRANTY
2.5HP AIR
COMPRESSOR
BELT-DRIVE
MODEL NO. BR5000 - PLU: 590973

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BR5000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Blackridge BR5000

  • Page 1 INSTRUCTION MANUAL 2.5HP AIR COMPRESSOR BELT-DRIVE MODEL NO. BR5000 - PLU: 590973 2.5HP Belt-drive motor 40 Litre tank size Includes Nitto style fitting Perfect for most medium duty air tools L/MIN TANK CAPACITY FREE AIR DELIVERY WARRANTY 8 BAR PRESSURE...
  • Page 2: Technical Information

    SMART MARKETING GROUP PTY. LTD. 6. Pressure Switch 12. Tank Drain Tap 18. Safety Valve NUMBER OF OUTLETS AUSTRALIA: 1300 660 457 19. Tank Pressure Gauge NEW ZEALAND: 0800 474 876 BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 3: Pre Setup Checks

    3. Push through the tank wheel bracket and replace flat washer, split washer and nut. 4. Tighten the nut. Air filter 5. Repeat for other wheel. Your air filter is factory fitted. Pic 7. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 4: You're In Control

    Allow to cool approximately 5 minutes. Recheck the oil IF YOU NEED TO GET CLOSER TO YOUR WORK level and top up if needed. AREA. Before starting your air compressor again ensure tank drain tap is closed. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 5: Maintenance

    3. Plug back into power point, turn on and restart compressor with pressure switch. NOTE: Remember to seal the drain tap before starting the OPEN air compressor. PIC. 12 PIC. 15 CLOSED BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 6 10. Replace then tighten the belt guard twist locks. To replace twist locks use pliers to rotate the twist locks by 90°. The replacement belt is similar to (Bosch Style) 13A1230. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 7 2. Slide the pump to the appropriate position. 3. Tighten the pump bolts. Pump 4. Check belt straightness and repeat if needed. Bolts 5. Check belt tension and correct if necessary. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 8: Specific Safety Instructions

    Always follow the instructions relating to the tools attached to not be covered under warranty. Refurbished parts may be used to repair the products. this air compressor. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 9 5 metres between the air compressor and the damaged have it replaced by an authorised service facility. work area, especially when using tools designed for sanding or spraying liquids. BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 10: Personal Safety

    Wheel and Cap - Large 95 BRWHL drowsiness. Regulator - Double Outlet 1 95 BRRDO Unloading Tube Belt 95 BRUTB Pressure Gauge - Outlet 95 BRPGHFO One Way Valve Hi-Flow 95 BROWVHF BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE BLACKRIDGE 2.5HP AIR COMPRESSOR BELT-DRIVE...
  • Page 11 2.5HP AIR COMPRESSOR BELT-DRIVE MODEL NO. BR5000 - PLU: 590973 For service, spare parts or product information, please contact: SMART MARKETING GROUP PTY. LTD. AUSTRALIA: 1300 660 457 NEW ZEALAND: 0800 474 876 04070 02/20...

This manual is also suitable for:

590973

Table of Contents