Blackridge 180 Hi-Flow User Manual page 14

pic. 10
The configuration of tools and accessories can be
varied to suit your particular requirements. A basic
recommended set up is shown in Pic. 10.
When you have finished using your air
compressor follow these simple steps:
1. Turn your air compressor OFF, using the ON/
OFF switch.
2. Turn the power point OFF and disconnect the
power lead.
3. Disconnect your air tools and air hose.
4. Clean your air hose and air tools.
5. Store your air hose and air tools in a secure
well ventilated cabinet.
6. Slowly open the tank drain tap, see page 16.
This allows excess air and moisture, water,
to vent.
7. Leave the tank drain tap open. This allows any
moisture to drain while the air compressor
is stored.
14