Wibnet - Monitor Comms; Figure 62 - Wibnet Monitor Comms - Elpro Technologies 915U-2 User Manual

915U-2 Wireless I/O
Time Source IP
03:02:45.073629 192.168.2.146.51891
03:02:45.075693 192.168.2.143.56678
Time Message Time Stamp – Time from when module was last started
Displays if message is a receive (In) or a transmit (Out) as well as the
Header
type and size of the Ethernet frame
Source IP Originating or Source IP Address
Dest IP Destination IP Address
Len Total length of ELPRO data
Type Type of Message, i.e. Write, Read, Gather /Scatter, Etc.
Seq Sequence number of the message
Indicates if the Elpro data frame is configured to acknowledge or not
Ack
acknowledged. This is configured in each mapping.
I/O address at the destination – where the data will be written to or read
Dest
from.
Cnt Total I/O count from the "dest" address above
Val Data values – the number of value will depend on I/O count.
5.7.3 WibNet – Monitor Comms
The above screen shot shows the Received and Transmitted WibNet data frames.
Page 85
Dest IP Len
192.168.2.143.4370 7
192.168.2.146.4370 1

Figure 62 - WibNet Monitor Comms

Type Seq Ack Dest
WRITE 9
ACK 9
Page 85
Cnt Val
1 1 11111110
User Manual