Page 72
915U-2 Wireless I/O
Product Reconfiguration
Changes the operating mode between WIBMesh and WIBNet.
WIBNet is a compatibility mode that will allow communications between the 915U-2 and
earlier ELPRO E-Series Telemetry units, e.g. 905U-1, 2, 3, 4, C, G, K, L, etc.
Figure 47 - Product Reconfiguration
The Dropdown box has two selections,
Meshing Mode - Standard Elpro WIBMesh and is the format that the module will be in
when it arrives from the factory.
Legacy Compatibility Mode – E-Series compatibility mode, will allow communications
with ELPRO E-Series modules Wireless I/ modules
To change from one to the other select the appropriate mode and then press 'Set" and
then 'Reset Unit' when prompted.
Module will then reset and when complete will be in the selected mode.
Note: WIBMesh is the default operational mode when setup in the factory.
.
Page 72
User Manual