Mesh Fixed Routes; Example #1 - Elpro Technologies 915U-2 User Manual

Page 66
Disable Rx LNA
Save Changes and
Reset.

4.3.4 Mesh Fixed Routes

In large radio systems there will often be a number of radios that will act as Repeaters
for the other radios. Because these sites are generally stationary they do not need to
learn the different paths and can have fixed routes back to the destination. We configure
these routes with Mesh Fixed Route Rules.
You can configure up to 100 fixed Route Rules for each site and the rules can be
targeted to a specific IP address by using a Host Route or a complete Subnet.
Note: If configuring Fixed Routes and any part of the communication path
fails, i.e, path, module, etc there is no fallback to Meshing.

Example #1

Page 66
Check box to disable the LNA (Low Noise Amplifier)
Reduces the Receive Sensitivity by about 15dB, used during
Demos, Bench testing, or close communication paths, etc.
Save settings to non-volatile memory, and reboot 915U-2.
Once the module has completed the reboot sequence, all
changes are in effect.
915U-2 Wireless I/O
User Manual