Table of Contents
Advertisement
Disassembly
Indoor Unit
Warning :
Disconnect the unit from power supply before making
any checks.
Be sure the power switch is set to "OFF".
To remove the Grille from the Chassis.
• Hold up Inlet Grille Horizentally.
• To remove the Grille, pull the lower left and right
side of the grille toward you (slightly tilted) and lift it
straight upward.
• To seperate connecter assembly and than to
remove Inlet Grille assembly.
1. Before removing the control box, be sure to
take out the wire screwed at the other end.
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 41 -
Disassembly
LGE Internal Use Only
Advertisement
Table of Contents
Troubleshooting
