Driver Assistance Systems - Chevrolet MALIBU 2015 Getting To Know Manual

DRIVER ASSISTANCE SYSTEMS

The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Lane Departure Warning
signal, the system flashes an amber
Press the Lane Departure Warning button on the center of the instrument panel to
turn the system on or off.
Forward Collision Alert
system flashes a visual alert.
Vehicle Ahead indicator will illuminate in green on the instrument cluster when a
The
vehicle is detected and will illuminate in amber when following a vehicle ahead too closely.
If your vehicle approaches another vehicle too rapidly, the collision alert will flash on the
windshield and beep rapidly.
Press the
Far, Medium, Near, or Off. The setting is displayed on the Driver Information Center.
Side Blind Zone Alert
symbol on the left or right side mirror when a vehicle is detected in that side blind zone
area. The warning symbol flashes if a turn signal is activated when a vehicle has been
detected.
To turn the system on or off, press the CONFIG button and go to Vehicle Settings >
Collision/Detection Systems > Side Blind Zone Alert.
Rear Vision Camera
a view directly behind the vehicle is displayed.
As part of the system, the Rear Cross Traffic Alert warns of traffic coming from either
direction by displaying a visual alert on the Rear Vision Camera display and sounding
three beeps.
To turn the Rear Vision Camera symbols and guidelines on or off, press the CONFIG
button and go to Display Settings > Symbols or Guidelines.
Rear Parking Assist
by audible beeps. The interval between beeps becomes shorter as the vehicle gets closer
to an object. When the distance is less than 12 in. (30 cm), the beeps are continuous. The
system only operates at speeds less than 5 mph.
To turn the system on or off, press the CONFIG button and go to Vehicle Settings >
Collision/Detection Systems > Park Assist.
F Optional equipment
18
– When crossing a detected lane marking without using a turn
F
– When approaching a vehicle directly ahead too quickly, the
F
Collision Alert button on the steering wheel to set the alert sensitivity to
– While driving, the Side Blind Zone Alert displays a
F
/Rear Cross Traffic Alert
F
– When the vehicle is in Reverse, detected objects are indicated
F
visual alert on the instrument cluster.
– When the vehicle is in Reverse,
F
See Driving and Operating in your Owner Manual.
warning