Table of Contents
Advertisement
3
Push the joy control downward (1
(¡
) to select "MOVE," then press SET.
4
Push the joy control downward (1
(¡
) to select the track you want to move.
Ex. When you want to move track 3
5
Press SET.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
6
Push the joy control downward (1
(¡
) to select the position where you want to
move the track.
Ex. When you want to move to the track 5 position
7
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks by repeating from step
4.
8
) or upward
Press ENTER/DEMO to finish the editing
procedure.
9
Press 0 for the MD recorder to eject the MD.
"WRITING" appears while the editing you have made
) or upward
is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD loading
slot.
2
Press EDIT.
The source is changed to "MD," and the MD recorder
enters editing mode (with DIVIDE function selected).
) or upward
3
Push the joy control downward (1
(¡
– 42 –
) to select "ERASE," then press SET.
Continued
) or upward
Advertisement
Table of Contents
