Color
Protocol
7. Mechanical
The following table defines the mechanical specifications of this product for both chassis and
cabinet.
Parameter
Dimension
W/O stand
Net Weight
Gross Weight
Net weight *without* stand
Chassis Plastic Material
External Plastic Chassis Components
Exterior Chassis Color/Texture/Details
Chassis Component's Color Difference
Chassis Color Drift Due to UV-Light
Molded Plastic
Screen Printed Parts, Bird Logo Recess
Rear Label
Wall Mount
Sample
In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable gap
between the buckets to bezel plastic pieces shall be within 1 mm. The maximum acceptable gap
between LCD panel and bezel shall be within 1.5 mm.
8. Environmental
The following table defines the operational/storage conditions of the product.
Operating Temperature
Humidity
Altitude
Storage Temperature
Humidity
Altitude
ViewSonic Corporation
Painting Color - PANTONE 427C (Black for front bezel & back cover)
Power Key - PANTONE 032C (RED)
Key Pads – PANTONE 11C & PANTONE 5C(Cool Gray)
Texts Printed on Front Cover and Key Pads - PANTONE 427C,
PANTONE 433C(Black)
VS key-code & protocol.
659.9 x 559 x 210 mm
659.9 x 493.5 x 101 mm
13.8 kg
TBA kg
TBA kg
ABS (ABS HB / ABS VO / PC+ABS/HIPS+MICA)
Plastic Chassis, Cover, Stand (Metal + Plastic),Len and
Button
Refer to Figure 1 – Product ID
Refer to Figure 1A – Color Guide
The color drift due to UL-Light shall be less than 10 "Delta
E" in the 1976 CIE L*a*b color space. Testing shall be
performed according to the requirements of ASTM Test
Method D4459-93.
Workmanship shall be inspected according to ViewSonic
Molded Plastic Parts Specification,
VSCMPPSPEC001V1.2.
Artwork shall be provided and confirmed by ViewSonic.
A label identifying the product name, model/serial number
and FCC ID/Logo shall be placed into the rear label recess
located on the rear panel of the chassis.
200/100 mm x 100mm VESA high hole (n=4), M4 X
10mm , pitch =1.0mm screw mounting kit not included.
Sample of textured color chips, plastic material
specification, and Material Safety Data Sheets shall be
submitted to ViewSonic prior to Mass Production Release.
0°C to +40°C
10% ~ 65% non-condensing
0 meter to +3000 meters above sea level
-20°C to +60°C
0 ~ 90% non-condensing
0 meter to 12,000 meters above sea level
8
Specification
Confidential - Do Not Copy
N2635w-1M