3.2
Checking the option configuration
3.2
Checking the option configuration
List of optional components
No.
Name
1
Authentication Unit
AU-201
2
Working Table
WT-P02
3
Finisher FS-P03
4
Keypad KP-101
5
Paper Feed Unit
PF-P13
6
DESK DK-P03
The following optional components are built into this machine and are not shown in the figure above.
7
Fax Kit FK-512
8
Mount Kit MK-738
9
i-Option LK-106
d-Color MF 3300/3800
6
Description
Performs user authentication by scanning information recorded on
the IC card.
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit or Finisher is in-
stalled.
Staples the printed sheets.
For staples, use Staple Kit SK-501.
Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
Allows you to load up to 500 sheets.
There are two slots in which the Paper Feed Unit can be installed.
Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
Used to operate this machine as a fax machine.
This is provided as standard on d-Color MF 3800 models sold in
North America.
This unit is required to install the Fax Kit.
This is provided as standard on d-Color MF 3800 models sold in
North America.
Used to add a bar code font, which is one of special fonts.
1
5
3
2
3
4
3-7