Bulbs - BMW R 1200 GS Adventure Manual

8
124
Slacken adjusting screws 1.
Push the two adapters 2 apart
until the front forks fit between
them.
z
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten adjusting screws 1.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.

Bulbs

General instructions
A warning appears in the multi-
function display if a bulb is de-
fective. If the brake or rear light
fails, the symbol is accompan-
ied by the 'General' warning light,
which lights up yellow.
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.