Remove The Front Wheel - BMW R 1200 GS Adventure Manual

Motorrad dealer or specialist
workshop to the fact that the
wheel is fitted with an RDC
sensor.

Remove the front wheel

Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
with BMW Motorrad Integral
OE
ABS II
Open the two retaining clips
holding the ABS sensor cable
to the brake line.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 1 of
the brake calipers on left and
right.
Force the brake pads slightly
apart by rocking brake
calipers 2 back and forth A
against brake discs 3.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
8
119
z