CARRON CAST IRON STOVE Installation And Operating Instructions

Cast iron stove

Table of Contents

Download this manual

Enlarged version

CARRON 5KW STOVE SE MODEL

BHC501-506 – Dated 12th January 2011

CARRON CAST IRON STOVE

INSTALLATION AND OPERATING INSTRUCTIONS

Carron stoves are imported and distributed in the UK by:

JIG UK Ltd, Hurlingham Business Park, Fulbeck Heath,

A qualified solid fuel engineer must carry out the installation of this stove.

Grantham, Lincolnshire, NG32 3HL

We cannot accept responsibility for products not installed in this way.

All local regulations, including those referring to national and European

email: sales@carron.uk.net freephone: 0808 129 2224

Standards need to be complied with when installing the appliance.

A list of qualified engineers is available from: www.hetas.co.uk

www.carron.uk.net

Table of Contents

Need help?

Do you have a question about the CAST IRON STOVE and is the answer not in the manual?

Page 1 BHC501-506 – Dated 12th January 2011 CARRON CAST IRON STOVE INSTALLATION AND OPERATING INSTRUCTIONS Carron stoves are imported and distributed in the UK by: JIG UK Ltd, Hurlingham Business Park, Fulbeck Heath, A qualified solid fuel engineer must carry out the installation of this stove.
Page 2 12 Pa Flue gas mass flow 3.5 g/s EN13240:2001 Weight of Stove 55.0 Kg THE CARRON STOVE Minimum distance to combustible materials: Behind the stove: 550mm To the side of the stove: 450mm CO at 13% 02: 0.63% Flue gas temperature: 303ºC Efficiency:76.0%...
Page 3 Operating Instructions too low or cool, suitable kindling must be used to relight fires. Fuels suitable for use in your Carron Stove: - Wood – logs (no larger than 225mmx75mmx75mm) should be dried for at least a year Do not fuel the stove to a level higher than the bricks. The maximum amount of fuel prior to burning, for other fuels please contact the manufacturer.
Page 4 Controlling the stove - Setting the primary air supply (the inlet below the glass door) Carron stoves do not contain asbestos. However, please take care not to disturb any air control – sliding the air control to the right will allow the maximum amount of air into existing asbestos when removing an old stove.