Template Adapter; Collet Protector With Blunt Leg; Template Adapter Gun Setup; Collet Protector/Blunt Leg Setup - Pro-Weld CD-212 Operation & Maintenance Manual

PRO
11.4 TEMPLATE ADAPTER (see Figure 7)
The template adapter is used when precise
location or positioning of the CD stud is required.
It is used with the round faceplate and does not re-
quire a footpiece or legs. The adapter is fastened to
the faceplate and provides a fixed distance be-
tween the collet and work. The plunge is set by us-
ing the correct stop in the collet. A template can
then be fabricated to enable very precise locating
of a particular stud.
The template adapter is available in two
sizes, (1" and 1-1/4" diameter).
Figure 7 Template Adapter gun setup
WEL D
11.5 COLLET PROTECTOR/BLUNT LEG
(see Figure 8)
The round faceplate, with blunt legs, can alter-
nately be used with the collet protector as shown in
Figure 8.
Figure 8 Collet Protector/Blunt Leg Setup
CD -2 1 2
Page 9