Registering The Connected Camera With V.networks Controller - JVC V.NETWORKS VN-C11 Read Me First

Registering the Connected Camera with V.Networks Controller

The connected camera can be registered with the installed [V.Networks Controller].
1.
Select [Start], [Programs], [V.NETWORKS] and then
up [V.Networks Controller].
2.
[New] is displayed.
Note
For connecting VN-C11 with the factory settings, either one of the environments described
below is required.
• Environment where no DHCP server exists.
• Environment where a DHCP server, which clearly defines the IP address and MAC address
allotted to VN-C11, exists.
[V.Networks Controller] to start
Select [File] and [New].
Enter 198.168.0.2 in [IP Address].
Note
In a DHCP environment, enter the IP
address allotted by the DHCP server.
Enter [V.Network Name], a name under which
the camera is registered. Use a name that is
easy to remember, such as the installation
location or number. (1 to 40 characters)
Recording files of the name given in
saved in a designated folder here.
You can set whether VN-C11 automatically
starts recording upon connection.
are
23